|
|
|
|
|
|
BUMPER BARN DOOR ZINC PLATED
|
|
|
Designed for use as a door stop on up to 2" thick sliding doors. Embossed steel for added strength. Display packed.
|
|
|
|
|
|
|
|
|
|
STAY ROLLERS ZINC PLATED
|
|
|
Designed for use as a guide on large, sliding doors. Mounts to concrete floor or apron. Delrin? bearing wheel rolls easier and lasts longer than many other steel bearing hangers. Offers heavy-duty stay roller and 3/8" x 41/2" lag screw with expansion shield. Meets ANSI/BHMA, A1S6.14.
|
|
|
|
|
|
|
|
|
|
STAY ROLLER BARN DOOR ZN PLTD
|
|
|
Without screws. Each loose.
|
|
|
|
|
|
|
|
|
|
STAY ROLLER BARN DOOR GALV
|
|
|
Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4" thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed
|
|
|
|
|
|
|
|
|
|
DOOR STOP BARN ADJ ZINC PLATED
|
|
|
Designed to engage the bottom of a single TAB-LOC door in either the open or closed position to hold firm against the building. For bi-parting doors stop engages in the open position only, also used on wood frame doors using #6061 or #6062 continuous bottom guides. Slotted holes in each leg allow both lateral and vertical adjustments. Bolt, nut, and washer are included for easy attachment. Boxed.
|
|
|
|
|
|
|
|
|
|
GUIDE BY-PASS DOOR ADJ 5-1/2IN
|
|
|
Extra-wide guides are designed for corrugated metal-clad doors, can be used as a door stop when mounted sideways. Curved section of guide may be turned sideways allowing straight access when installing screws. Fasteners are not included. Guides have holes for spikes as well as larger holes for 3/8" lag screw mounting. Guide is adjustable for doors up to 5-1/2" thick.
|
|
|
|
|
|
|
|
|
|
RAIL BARN DOOR GUIDE GALV 6FT
|
|
|
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose.
|
|
|
|
|
|
|
|
|
|
RAIL BARN DOOR GUIDE GALV 8FT
|
|
|
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose.
|
|
|
|
|
|
|
|
|
|
RAIL BARN DOOR GUIDE GALV 10FT
|
|
|
Designed to engage the bottom lateral of TAB-LOC doors to hold door firmly in place and prevent wind damage to both the door and building. Fastens to building using #6005 Guide Rail Brackets. Also used with #6061 or #6062 continuous bottom guides. Includes pre-punched mounting holes to attach #6005 guide rail brackets. Pack loose.
|
|
|
|
|
|
|
|
|
|
GUIDE DOOR ZINC PLATED
|
|
|
Designed for large, single sliding doors. Adjustable to fit doors from 2" to 3 1/2" thick. Curved guides to help move doors smoothly and reduce damage. 6" L x 4" W.
|
|
|
|
My cart:
