|
|
|
|
|
|
National Hardware N235-309 Bar Holder, 6.31 in L x 1.5 in W x 0.29 in D Dimensions, Steel, Zinc
|
|
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
|
|
|
|
|
|
|
|
|
National Hardware N235-291 Bar Holder, 6.38 in L x 1.5 in W x 1.6 in H Dimensions, Steel, Zinc
|
|
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
|
|
|
|
|
|
|
|
|
National Hardware N351-503 Bar Holder, 6.29 in L x 1.5 in W x 1.6 in D Dimensions, Steel
|
|
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
|
|
|
|
|
|
|
|
|
National Hardware N100-313 Door Pull, 1.38 in W, 1.82 in D, Steel, Zinc
|
|
|
National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, Steel, Zinc, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws
|
|
|
|
|
|
|
|
|
|
National Hardware N193-839 Round Rail End Cap, Steel, Galvanized
|
|
|
With bolt, nut and washer. Pack loose.
|
|
|
|
|
|
|
|
|
|
National Hardware N351-502 Bar Holder, 6.38 in L x 1.5 in W x 1.6 in H Dimensions, Steel
|
|
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
|
|
|
|
|
|
|
|
|
National Hardware N100-289 Door Pull, 1.38 in W, 1.82 in D, 6-3/4 in H, Steel
|
|
|
National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, Black, Steel, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws
|
|
|
|
|
|
|
|
|
|
National Hardware N104-349 Box Rail Bracket, 2-1/4 in W x 2 in D x 4-19/32 in H Dimensions, Steel, Galvanized
|
|
|
Designed as a support bracket for Stanley's 105270, 105676, 105213 and 105726 box rail at 24 in OC intervals. Includes lags. Display packed.
|
|
|
|
|
|
|
|
|
|
National Hardware N100-834 Door Bumper, Steel, Zinc
|
|
|
Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed.
|
|
|
|
|
|
|
|
|
|
National Hardware N104-612 Triangle Bracket, Steel, Galvanized
|
|
|
Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. Safe working load.
|
|
|
|
My cart:
