CUTTING GUIDES

Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > SAW BLADES & ACCESSORIES > CUTTING GUIDES

Sort By:

Kreg KMA4600 Straight Edge Guide Extension, 2 ft L, Aluminum

Our Price: $24.99

Expand the cutting capacity of your straight edge guide. Add two extra feet of guide rail to your Kreg? straight edge guide in minutes. With this extension, you can make even longer cuts in sheet goods while using a circular saw, jigsaw, or trim router.

Kreg KMS7520 Track Clamp

Our Price: $25.99

Track clamps make perfect companions to the Accu-Cut family of products, as well as the adaptive cutting system. These easy-to-use clamps lock into place on the underside of the Accu-Cut track and starting block to offer additional holding power when needed such as when working with slick-surfaced sheet goods like melamine-coated particleboard or when cutting with a single length of track. The clamps are also suitable for use with the adaptive cutting system guide track by sliding them onto the underside of the track where additional holding power may be needed. Track clamps are also compatible with other Kreg products such as clamp trak, universal clamp trak kits and mini trak. In addition, track clamps are handy for creating shop-built jigs and fixtures.

Johnson J4900 Cutting Guide, Aluminum

Our Price: $31.99

Two 49in heavy-duty extruded aluminum rails with patented quick-to-assemble connector, guide assures true and accurate cuts, includes both rails, joiner plate and two C clamps, use with circular saw, router, utility knife, jigsaw and other tools.

Kreg Rip-Cut KMA2685 Circular Saw Edge Guide, Aluminum/Plastic

Our Price: $45.99

The Kreg Rip-Cut? turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF and other large sheets. With the Rip-Cut?, you can cut with the confidence you want and the precision you need. The Rip-Cut? easily makes straight, accurate, repeatable cuts without measuring, marking or having to keep the saw on the cut line. The Rip-Cut? does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want up to 24 in using the built-in measuring scale and then make your cut. With a built-in measuring scale, you don't have to measure and mark each cut, either. Just lock the saw sled at your desired cut width and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut? makes it easier to cut down large sheets by yourself. The Rip-Cut? is very easy to use. Simply mount your saw to the universal sled it accepts most left-blade or right-blade saws and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24 in) using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You'll get straight, accurate, repeatable cuts easily every time.

BORA PORTAMATE 545050 Clamp Edge, 50 in L, Aluminum

Our Price: $45.99

BORA PORTAMATE Clamp Edge, Aluminum, 50 in Length

Kreg KMA4500 Straight Edge Guide, Aluminum

Our Price: $49.99

Kreg Straight Edge Guide, Specifications: 4 ft Cutting Capacity, Aluminum, Suitable for: Left and Right Blade Circular Saws, Jigsaws and Trim Routers, Includes: (2) 28 in Guide Rails, (2) Paired Connector Bars, (2) Cutline Indicator Arms, Adjustable GripMaxx Clamp, Handle

Kreg Accu-Cut KMA2750 Expansion Pack, Aluminum

Our Price: $99.99

Double the cutting capacity of your Accu-Cut? with the Accu-Cut expansion pack. It connects easily to your Accu-Cut to deliver the same straight, accurate, splinter-free performance on cuts up to 100 in long. Make the cuts you need at any length and angle on panels, plywood and MDF. The Accu-Cut Expansion Pack brings the same consistent, dependable performance to your projects that you expect from the Accu-Cut but allows you to guide your circular saw along an even longer aluminum track for support through the entire cut. The anti-slip, anti-chip guide strips extend through all four track pieces to bring the same tearout protection and stability to your cuts, no matter the length. It's easy to transform your Accu-Cut into a high-performance, 100 in track guide with the Accu-Cut Expansion Pack. Simply connect the two guide tracks to your Accu-Cut whenever you need to make longer cuts. Take your saw and track to your workpiece to make any length cut anywhere.

Kreg KMA4700 Straight Edge Guide, Aluminum

Our Price: $109.99

Kreg Straight Edge Guide, Specifications: XL, 8 ft Cutting Capacity, Aluminum, Suitable for: Left and Right Blade Circular Saws, Jigsaws and Trim Routers, Includes: (2) 28 in Guide Rails, (2) 24 in Guide Rails, (6) Paired Connector Bars, (2) Cutline Indicator Arms, Adjustable GripMaxx Clamp, Handle

TRACK SAW X-LARGE

Our Price: $199.99

Set your projects up for success by making straight, accurate, splinter-free cuts with the Accu-Cutr XL Circular Saw Track Guide. It rips, crosscuts and makes angled cuts up to 100" long in plywood, MDF and other large panels with accuracy and control. The anti-chip guide strips prevent splintering and tear-out through the entire length of your cut. The same strips also feature an anti-slip surface that holds the track in place without clamps.


	1