|
|
|
|
|
|
Kreg KMS7215 Router Table Micro Adjuster, For Use With Kreg Precision Band Saw Fence
|
|
|
Time-saving and accurate saw fence micro-adjuster. Allows you to dial-in precise adjustments easily with one hand to your Kreg Precision router table or Precision band saw down to .005". Easy to grip ribbed dial. Black plastic fixing knob. Dimensions: 7" x 2" x 5".
|
|
|
|
|
|
|
|
|
|
True-Flex PRS3010 Single Featherboard, Plastic
|
|
|
Provides a consistent and optimum pressure. Made from a durable plastic composite body. Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.
|
|
|
|
|
|
|
|
|
|
Kregtool PRS3100 Multi-Purpose Router Table Switch, 15 A, 120 V
|
|
|
Add safety and convenience to your Precision Router Table with this incredibly handy power switch. Features a 2 plug design which allows it to control two independent devices at once. Key-Lok which eliminates accidental power-on, and a long 8' heavy-duty 14 gauge power cord. 15amp, 120v.
|
|
|
|
|
|
|
|
|
|
LEG STAND FOR RK7136.2 SAW
|
|
|
Leg stand for the RK7136.2 (711.6411) miter saw. 4 easily attached legs allow users to accurately and safely use the miter saw away from the work bench. Legs slide into pockets in the miter saw base and secure with large thumb screws. Leg stand includes rolling material supports that attach to a 2" x 4" (Not Included). The rolling material supports also include material stops for repetitive cuts.
|
|
|
|
|
|
|
|
|
|
BAR SETUP ROUTER TABLE 7PC
|
|
|
Setup Bar is made from soft aluminum, designed to prevent damage to your router bit or saw blade in case they make contact during setup. Exclusive three-gauge design of the Precision Setup Bars makes them perfect for a wide variety of applications. The concave step on the bottom of each setup bar straddles your router bit or saw blade to allow for precise height adjustment. The step on the top edge of each setup bar acts as a gauge to test the depth of your completed cuts. The step on the end of each setup bar can be used to set the distance from a tablesaw blade to the fence, or a router bit to the fence. Includes: (7) Precision Router Table Setup Bars, stored in a portable, protective case. Sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16, and 1/2".
|
|
|
|
|
|
|
|
|
|
CARTRIDGE ACTIVATION 2 SHOT
|
|
|
Exclusively designed for use with the Bosch GTS1041A REAXX 10 inch jobsite table saw (8916587). The cartridge is part of the saw's Active Response Technology, which imparts a low-voltage electrical signal onto the blade. The signal alters upon contact with the user's skin, triggering a chemical reaction in an activation cylinder similar to the deployment of an airbag in an automobile. In this case, instead of deploying and airbag, the chemical reaction fires a piston that pushes against the drop arm. This action rapidly forces the saw blade down and away from the operator, mitigating serious user injury. Each cartridge allows for two activation s before replacement is needed. Additional onboard cartridge storage is located onboard the tool. After activation, the system can be reset in less than 60 seconds. Each of the dual-activation cartridges has been designed to have a 20 year shelf life and each has an expiration date printed on it. The dual-activation cartridge works with standard 10 inch fine finish and construction-grade blades and stacked dado blades. Includes 1 Dual-Activation Cartridge.
|
|
|
|
|
|
|
|
|
|
Richpower GMSS400W Heavy Duty Miter Saw Stand With Wheels, 400 lb, Steel
|
|
|
Heavy-duty all steel construction, stand supports up to 400 lbs. Universal design accommodates all brands of miter saws, including 12" sliding miter saws. Quick-release mounting brackets for easy miter saw mounting and removal. Tool-free adjustment of material supports and extension arms. Material supports include rollers and positive stops for repetitive cuts. Weighs 41.8 lbs.
|
|
|
|
|
|
|
|
|
|
BASE ROUTER TABLE COMPONENT 3
|
|
|
This adjustable and durable table is built to last. Comes equipped with levelers to compensate for uneven floors. The stand has predrilled holes that make it easy to mount accessories and to customize the stand. Versatile, system-ready design for all Kreg table top solutions, including the Klamp Table and the Precision Router Table Top. You can also use it to create a custom tool or work stand for your shop. Made from heavy 12 and 16 gauge steel and can be adjusted from 31" to 39: (78.7 cm to 99.1 cm) in height. Includes (4) leveling feet and assembly hardware. Combine with the Router Table Top (5100797) and the Router Table Fence (5823109) to assemble into the PRS1045 Router Table.
|
|
|
|
|
|
|
|
|
|
TOP ROUTER TABLE COMPONENT 2
|
|
|
High performance router table with insert plate. This rugged MDF table top provides a solid, secure routing solution for any workshop. A 1" thick (25mm) MDF core provides a flat, solid top that absorbs vibrations, while steel reinforcing struts prevent sagging; even under the weight of heavy routers and lifts. Durable, high pressure laminate skin offers a low-friction Easy-Slide surface, making it easy to slide work pieces across the surface. Thick edge banding protects the top against bumps and abrasions. Pre-drilled top with holes for Precision Insert-Plate Levelers. Includes (1) Industrial duty Router Table Top, (1) Insert Plate with 3 Level-Lock rings, ring wrench and starting pin, (4) Precision Insert Plate Levelers, (1) Miter Gauge/T-Slot Track, (2) Steel reinforcing struts, and (1) Hardware set and owner's manual. Combine with the Router Table Base (5100789) and the Router Table Fence (5823109) to assemble into the PRS1045 Router Table.
|
|
|
|
|
|
|
|
|
|
FENCE ROUTER TABLE COMPONENT 1
|
|
|
This anodized-aluminum fence features a table saw-style T-square adjustment system that ensures the fence will always stay parallel to the miter gauge slot. The fence adjusts easily with just one hand and locks firmly in place with dual locks. A large paddle lock on the in-feed end and a quarter-turn lock on the outfeed end that prevents fence deflection. Combine with the Router Table Top (5100797) and the Router Table Base (5100789) to assemble into the PRS1045 Router Table.
|
|
|
|
My cart:
