|
|
|
|
|
|
Vaughan & Bushnell 240RBP Replacement Saw Blade, 8-3/8 in L, 17 TPI, Spring Steel
|
|
|
Durable rust resistant spring steel blades. Specially ground, tri-edge teeth are impulse hardened to retain sharpness. Blades Interchangeable to match specific blade to task. Blade locks securely in handle. Blade guard protects teeth when saw is stored. 240RBP fits 991.5562, 250RBD fits 700.6372 and 265RBM fits 389.1579.
|
|
|
|
|
|
|
|
|
|
ProTouch 2014450 Dovetail/Jamb Saw, 10 in L 2 in T, 14 TPI
|
|
|
Wide body reversible flush cut blade used to flush cut door jambs and millwork for tile installation/prep. Spring loaded pin enables blade to reverse for left or right cutting. Ergonomic ProTouch handle.
|
|
|
|
|
|
|
|
|
|
Irwin 213104 Dovetail/Detail Saw, 7-1/4 in L, 22 TPI
|
|
|
Used to flush cut dowels or fine detail cut such as work around windows and door frames. Pull stroke action eliminates binding and facilitates a straight cut. Induction hardened teeth stay sharp longer; quick release button for blade replacement.
|
|
|
|
|
|
|
|
|
|
Vaughan & Bushnell 265RBM Hand Saw, 10-1/2 in L 0.024 in T, 14 TPI, Tri-Ground
|
|
|
Durable rust resistant spring steel blades. Specially ground, tri-edge teeth are impulse hardened to retain sharpness. Blades Interchangeable to match specific blade to task. Blade locks securely in handle. Blade guard protects teeth when saw is stored. 240RBP fits 991.5562, 250RBD fits 700.6372 and 265RBM fits 389.1579.
|
|
|
|
|
|
|
|
|
|
DeWalt DWHT20541 Flush Cut Pull Saw, 5 in L, 23 TPI, Aggressive
|
|
|
A specialized type of hand saw that features flexible blades that allow it to lay flat on a surface while cutting without damage to the surface below; classic flush cut design that cuts on the pull stroke so it can cut quickly while leaving a clean edge free of chips and burrs; the blade is double-sided so one can cut from either the left or right side of the material and the comfortable handle design will offer all the control one needs to cut once every time.
|
|
|
|
|
|
|
|
|
|
FatMax 20-331 Mini Flush Cut Pull Saw, 4-3/4 in L, 22 TPI
|
|
|
Double sided blade cuts from the left or the right, 23-point tooth geometry cuts quickly and cleanly on the pull stroke. Flexible blade for flush cutting plugs and dowels or for trimming through tenon or lap joints and ergonomic cushion grip handle.
|
|
|
|
|
|
|
|
|
|
Vaughan & Bushnell BS240P Hand Saw, 8-3/8 in L 0.022 in T, 17 TPI, Tri-Ground
|
|
|
Cuts on pull stroke for easier sawing. Extra fine crosscut with thin, spring steel blades which are durable and rust resistant. Ground and impulse hardened tri edged teeth are razor sharp to cut cleanly and accurately. Saws have blade guards to protect teeth when not in use and can be quickly disassembled for convenient toolbox storage. Order item no. 7249543 for replacement blade.
|
|
|
|
|
|
|
|
|
|
Vaughan & Bushnell 250RBD Replacement Double Edge Saw Blade, 10 in L 0.02 in T, 18 TPI
|
|
|
Durable rust resistant spring steel blades. Specially ground, tri-edge teeth are impulse hardened to retain sharpness. Blades Interchangeable to match specific blade to task. Blade locks securely in handle. Blade guard protects teeth when saw is stored. 240RBP fits 991.5562, 250RBD fits 700.6372 and 265RBM fits 389.1579.
|
|
|
|
|
|
|
|
|
|
FatMax 15-252K Back Saw, 10 in L X 3 in W, 15 TPI
|
|
|
Extra wide blade 3" for fine woodworking used for precise cutting of dovetails, small joints and cutoff; steel back prevents bowing for true straight cuts. Spring-loaded pin allows blade to reverse quickly for left or right cutting, reversible handle with ergonomic cushion grip.
|
|
|
|
|
|
|
|
|
|
Irwin 213101 Hand Saw, 12 in L, 14 TPI
|
|
|
Flexible blade for flush cut with ProTouch grip. For use in cross and rip cuts, exterior trim carpenter/cutting the overhang of gable soffit.
|
|
|
|
My cart:
