|
|
|
|
 |
STANLEY 16-233 Pin Punch, 3/16 in Tip, 6 in L, 1/4 in Dia Shank, Hex Shank, Chrome Vanadium Steel
|
|

STANLEY Pin Punch, 3/16 in Tip, Shank Type: Hex, Shank Diameter: 1/4 in, Chrome Vanadium Steel, Powder-Coated, 6 in L
|
|
 |
|
|
|
|
 |
STANLEY 16-230 Pin Punch, 1/16 in Tip, 6 in L, 1/4 in Dia Shank, Hex Shank, Chrome Vanadium Steel
|
|

STANLEY Pin Punch, 1/16 in Tip, Shank Type: Hex, Shank Diameter: 1/4 in, Chrome Vanadium Steel, Powder-Coated, 6 in L
|
|
 |
|
|
|
|
 |
DASCO PRO 530-0 Center Punch, 1/4 in Tip, 4 in L, HCS
|
|

Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
|
 |
|
|
|
|
 |
DASCO PRO 539-0 Prick Punch, 1/4 in Tip, 4 in L, HCS
|
|

Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
|
 |
|
|
|
|
 |
GENERAL Jiffy Series 806 Self-Center Punch, 3/8 in Tip, 2-1/2 in L, Steel
|
|

Hardened steel pin, knurled body provides no-slip grip, auto-centering and countersunk end. Used for creating starter screw holes.
|
|
 |
|
|
|
|
 |
DASCO PRO 531-0 Center Punch, 5/16 in Tip, 4-1/2 in L, HCS
|
|

Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.
|
|
 |
|
|
|
|
 |
DASCO PRO 540-0 Prick Punch, 5/16 in Tip, 4-1/2 in L, HCS
|
|

Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
|
 |
|
|
|
|
 |
DASCO PRO 541-0 Prick Punch, 3/8 in Tip, 5 in L, HCS
|
|

Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
|
|
 |
|
|
|
|
 |
DASCO PRO 592-0 Pin Punch, 1/16 in Tip, 4-1/2 in L, HCS
|
|

Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
|
 |
|
|
|
|
 |
DASCO PRO 581-0 Pin Punch, 3/32 in Tip, 5-1/2 in L, HCS
|
|

Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
|
|
 |