|
|
|
|
|
|
Plumb Pak PP10-8SN Coin Air Valve
|
|
|
Valve is operate by a coin or screwdriver.
|
|
|
|
|
|
|
|
|
|
SharkBite 17198-0000 Vacuum Breaker, 3/4 in, Brass
|
|
|
SharkBite Vacuum Breaker, 3/4 in, Female x Male End Connection, Brass Body, 180 Deg F, Use On Homes, Schools, Laboratories or Any Commercial Building
|
|
|
|
|
|
|
|
|
|
B&K 108-904RP Backflow Preventer Vacuum Breaker, 3/4 in, MPT, Brass
|
|
|
Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved.
|
|
|
|
|
|
|
|
|
|
Plumb Pak PP827-9 Loose Key Air Valve
|
|
|
1/8 x 27 NPT. Fits most steam radiators. Includes one vent and one key. Chrome plated.
|
|
|
|
|
|
|
|
|
|
B&K 108-904 Silcock Vacuum Breaker, 3/4 in
|
|
|
Fits any 3/4'' hose thread outlet. Prevents back siphoning of contaminated water, protection for portable hoses connected to hose thread faucets. Break-off attachment screw for permanent installation with no plumbing changes. Hose threads comply with ANSI B1.20.7; ASSE 1019 approved, UPC, Canadian UPC approved.
|
|
|
|
|
|
|
|
|
|
B&K 109-204 Self-Closing Drum and Barrel Faucet, 3/4 in, MPT Inlet X Plain Outlet, Zamac Body, Painted Brass
|
|
|
Zamac construction. Convenient holes to lock handle closed position. For use with all petroleum products, except trichlorethylene. Not for use with detergents or water. 3/4" male pipe thread inlet. Threaded inlets comply with ANSI B1.20.01.
|
|
|
|
|
|
|
|
|
|
VAC BRKR ANTIFRZR LF BRS 3/4X2
|
|
|
|
|
|
|
|
|
|
|
|
|
Arrowhead PK1430 Round Handle Air Vent Assembly, For Use With Arrowhead 420 and 455BFP Series Frost Free Hydrants
|
|
|
Includes vacuum breaker cap, underbody, o-ring, and plunger. Air vent assembly for Arrowhead frost free hydrants, 420 & 455BFP series.
|
|
|
|
|
|
|
|
|
|
|
VAC BRKR ANTIFRZ BRS 3/4X1-1/4
|
|
|
|
|
|
|
|
|
|
|
|
|
SHOCK ABSORBR SUPPLY MIP 1/2IN
|
|
|
Oatey quiet pipes water hammer absorbers are designed to reduce water pipe banging noise caused by quick-closing valves and protect plumbing appliances and fixtures from the effects of water hammer. Quiet pipes absorbers contain a piston that uses a triple O-ring to maintain 60 psi charge in the tube. When the water valve is shutoff, it sends a shock through the system and the piston compresses. This absorbs a shock that would normally rattle and shake the pipe.
|
|
|
|
My cart:
