|
|
|
|
|
|
SOLVENT WELD VALVE 1/2 CPVC
|
|
|
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
|
|
|
|
|
|
|
|
|
|
SOLVENT WELD VALVE 3/4 CPVC
|
|
|
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
|
|
|
|
|
|
|
|
|
|
Flair-It 30879 Stop Valve, 1/2 x 1/2 in Connection, PEX, 100 psi Pressure, Polysulfone Body
|
|
|
Use to install shut-off in straight pipe run. Made of PPSU (polysulfone). Works on all Brands of PEX pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi patent pending.
|
|
|
|
|
|
|
|
|
|
Flair-It 30890 Manifold Valve, 1/2 x 1/2 in Connection, PEX x FPT, 100 psi Pressure, Polysulfone Body
|
|
|
Made of PPSU (polysulfone). Works on all brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi approved for behind the wall and underground applications. Patent pending.
|
|
|
|
|
|
|
|
|
|
Flair-It 30891 Manifold Valve, 1/2 x 1/2 in Connection, PEX x FPT, 100 psi Pressure, Polysulfone Body
|
|
|
Made of PPSU (polysulfone). Works on all brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi approved for behind the wall and underground applications. Patent pending.
|
|
|
|
|
|
|
|
|
|
Flair-It 30892 Manifold Valve, 1/2 x 1/2 in Connection, PEX x FPT, 100 psi Pressure, Polysulfone Body
|
|
|
Made of PPSU (polysulfone). Works on all brands of PEX Pipe. Install with pliers remove with screwdriver. No special crimp tool needed. cNSF-14, cNSF-61, CSA compliant. Fittings and rings included in each bag. Temperature approvals 180 deg F at 100 psi approved for behind the wall and underground applications. Patent pending.
|
|
|
|
|
|
|
|
|
|
Southland 105-503NL Stop Valve, 1/2 in Connection, Compression, 125 psi Pressure, Brass Body
|
|
|
Rising stem, 6-point cast iron handle, solder ends comply with ANSI B16.18, certified to NSF 61-G.
|
|
|
|
|
|
|
|
|
|
Flair-It 16879 Stop Valve, 3/8 in Connection, PEX, Plastic Body
|
|
|
For hot or cold water In-line valve with PEX connections on both ends. Bar coded.
|
|
|
|
|
|
|
|
|
|
Flair-It 16880 Stop Valve, 1/2 in Connection, PEX, Plastic Body
|
|
|
For hot or cold water In-line valve with PEX connections on both ends. Bar coded.
|
|
|
|
|
|
|
|
|
|
WATTS PL-3012 Stop Valve, 1/4 in Connection, Compression x MPT, 150 psi Pressure, Manual Actuator, CPVC Body
|
|
|
Plastic quick-connect fittings are made from polysulfone, a high performance thermal plastic material. Design allows for quick and easy connections to pipe without installation tool. Use on copper, pex, CPVC and polybutylene pipe. Product meets all National Plumbing Codes.
|
|
|
|
My cart:
