|
|
|
|
|
|
IRWIN 8202 Pipe Taper Tap, Plug Tap Point, 4-Flute, HCS
|
|
|
Cuts internal threads in pipes, tapered at a rate of 3/4 in/ft, nominal size of the tap is that of the pipe fitting being tapped, four flutes. Used in applications such as pipe fittings.
|
|
|
|
|
|
|
|
|
|
IRWIN 8203 Pipe Taper Tap, Plug Tap Point, 4-Flute, HCS
|
|
|
Cuts internal threads in pipes, tapered at a rate of 3/4 in/ft, nominal size of the tap is that of the pipe fitting being tapped, four flutes. Used in applications such as pipe fittings.
|
|
|
|
|
|
|
|
|
|
IRWIN 1904P Pipe Taper Tap, Tapered Point, 4-Flute, HCS
|
|
|
Cuts internal threads in pipes, tapered at a rate of 3/4 in/ft, nominal size of the tap is that of the pipe fitting being tapped, four flutes. Used in applications such as pipe fittings.
|
|
|
|
|
|
|
|
|
|
IRWIN 1904ZR Pipe Taper Tap, Tapered Point, 4-Flute, HCS
|
|
|
Cuts internal threads in pipes. Nominal size of the tap is that of the pipe fitting being tapped.
|
|
|
|
|
|
|
|
|
|
IRWIN 1905P Pipe Taper Tap, Tapered Point, 4-Flute, HCS
|
|
|
Cuts internal threads in pipes, tapered at a rate of 3/4 in/ft, nominal size of the tap is that of the pipe fitting being tapped, four flutes. Used in applications such as pipe fittings.
|
|
|
|
|
|
|
|
|
|
IRWIN 1905ZR Pipe Taper Tap, Tapered Point, 4-Flute, HCS
|
|
|
Cuts internal threads in pipes. Nominal size of the tap is that of the pipe fitting being tapped.
|
|
|
|
|
|
|
|
|
|
IRWIN 1906P Pipe Taper Tap, Tapered Point, 5-Flute, HCS
|
|
|
Cuts internal threads in pipes, tapered at a rate of 3/4 in/ft, nominal size of the tap is that of the pipe fitting being tapped, four flutes. Used in applications such as pipe fittings.
|
|
|
|
|
|
|
|
|
|
IRWIN 1906ZR Pipe Taper Tap, Tapered Point, 5-Flute, HCS
|
|
|
Cuts internal threads in pipes, tapered at a rate of 3/4 in/ft, nominal size of the tap is that of the pipe fitting being tapped, four flutes. Used in applications such as pipe fittings.
|
|
|
|
|
|
|
|
|
|
TAP PIPE 1/8IN-27NPT SAE HCS - Case of 5
|
|
|
Cuts internal threads in pipes. Nominal size of the tap is that of the pipe fitting being tapped.
|
|
|
|
|
|
|
|
|
|
IRWIN 1907ZR Pipe Taper Tap, Tapered Point, 5-Flute, HCS
|
|
|
Cuts internal threads in pipes, tapered at a rate of 3/4 in/ft, nominal size of the tap is that of the pipe fitting being tapped, four flutes. Used in applications such as pipe fittings.
|
|
|
|
My cart:
