|
|
|
|
|
nVent ERICO ZWP1J Pipe Clamp, Clamping Range: 1/2 to 1 in, #10 to #6 AWG Wire, Zinc
|
|
Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod.
|
|
|
|
|
|
|
|
Halex 16010B Ground Clamp, 10 to 2 AWG Wire, Zinc, Zinc
|
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
|
|
|
|
|
|
|
GB GGS-1512R Ground Screw, #10-32 Thread, Hex Drive
|
|
Green round washer head screw for switch and outlet boxes.
|
|
|
|
|
|
|
|
Gardner Bender 14-GRC Ground Clamp, Clamping Range: 1/2 to 1 in, 10 to 2 AWG Wire, Galvanized
|
|
Connects grounding wire to the grounding rod.
|
|
|
|
|
|
|
|
Gardner Bender GGP-1502 Grounding Pigtail, 12 AWG Wire, Copper, Green, 2/BAG
|
|
GB offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw.
|
|
|
|
|
|
|
|
nVent ERICO CP58 Ground Clamp, Clamping Range: 1/2 to 5/8 in, #10 to 2 AWG Wire, Silicone Bronze
|
|
Connects grounding wire to the grounding rod. UL and CSA listed for 1/2 in and 5/8 in ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.
|
|
|
|
|
|
|
|
Halex 93591 Ground Clamp, Bronze
|
|
Connects grounding wire to the grounding rod.
|
|
|
|
|
|
|
|
Gardner Bender GGC-1508 Ground Clip, Zinc
|
|
Convenient grounding accessories include products suitable for most job requirements.
|
|
|
|
|
|
|
|
Halex 93592 Ground Clamp, Bronze
|
|
Connects grounding wire to the grounding rod.
|
|
|
|
|
|
|
|
Halex 36010 Ground Clamp, 10 to 2 AWG Wire, Bronze
|
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
|
|