|
|
|
|
|
|
LAMPHOLDR PORC WHT 660W 250V
|
|
|
Porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. One piece with feed through. Terminal screws backed out for wiring without removing the interior. UL 496 Listed, NOM Certified, meets CSA requirements. 250 volt, 660 watts.
|
|
|
|
|
|
|
|
|
|
Eaton Wiring Devices S1174W Lamp Holder, 250 V, 660 W, Plastic Housing Material, White
|
|
|
Keyless Plastic ceiling lamp holders are molded of high-temperature, thermoset plastic to reduce breakage. Mounts on 4 in (101.6 mm) outlet boxes with breakout for 3-1/4 in (82.5 5 mm) box mounting. Leads are 6 in (152.4 mm) 105 deg C insulated stranded #16, stripped 3/4 in (19.05 mm). Pull chain devices include ball chain, 3 ft (0.91 m) of cord, connector and endbell. Top wire versions have terminal screws backed out - ready for wiring - without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Sockets available in two piece version to permit interior replacement, dust ring protects against plaster and dirt. Shade grooves provided on two piece units.
|
|
|
|
|
|
|
|
|
|
Eaton Wiring Devices BP850V Night Light, 15 A, 125 V, 4 W, Incandescent Lamp, Ivory Light, Plastic Fixture
|
|
|
Night lights with soft action rocker switch. Incandescent 4 W bulb - 3000 hr lamp life. Body and shade molded of heat-resistant plastic. Shade can rotate.
|
|
|
|
|
|
|
|
|
|
Eaton Wiring Devices BP850W Night Light, 15 A, 125 V, 4 W, Incandescent Lamp, White Light, Plastic Fixture
|
|
|
Night lights with soft action rocker switch. Incandescent 4 W bulb - 3000 hr lamp life. Body and shade molded of heat-resistant plastic. Shade can rotate.
|
|
|
|
|
|
|
|
|
|
Allied Moulded LH-11P Lamp Holder, 250 V, 660 W, White
|
|
|
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 V/660 W maximum. Includes corrosion resistant steel hardware. cULus listed.
|
|
|
|
|
|
|
|
|
|
LAMPHOLDER CEIL P-CHN CORD WHT
|
|
|
Meets all UL 496 requirements. Molded of high-temperature, thermoset plastic to prevent discoloration and reduce breakage. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain, includes ball chain, 3' of cord, connector and end bell. Terminal screws backed out, ready for wiring without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Two piece version with 15 amp 125 volt, 250 watts AC 2P3W outlet, plastic.
|
|
|
|
|
|
|
|
|
|
LAMPHOLDER PORC WHT 250W 250V
|
|
|
Porcelain, mounts on 4" outlet box with breakout for 3-1/4" box mounting. Interior is removable. Includes ball chain, 3' of cord, connector and end ball. UL Listed, meets CSA requirements, NOM certified. 250 volt, 660 watts.
|
|
|
|
|
|
|
|
|
|
Eaton Lighting LZR212P Track Light Connector, White, For: Lazer Track Lamp holders and Halo Power-Trac Lamp holders
|
|
|
The overall height is 9/16 in and the track has a decorative reveal at the ceiling line. It accepts both lazer track lamp holders and Halo power-trac lamp holders. Connectors push into the ends of the track. Straight, right angle and flexible connectors allow track to be assembled in almost any pattern.
|
|
|
|
|
|
|
|
|
|
Eaton Wiring Devices 669-SP Lamp Holder, 125 VAC, 660 W, White
|
|
|
With 15 A 125 VAC outlet. High-strength insulator porcelain. Mounts on 4 in outlet boxes with breakout for 3-1/4 in box mounting. Pull chain socket interior is removable. Includes ball chain, 3 ft of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 listed, NOM certified, meets CSA requirements. 15 A, 125 V, 660 W.
|
|
|
|
|
|
|
|
|
|
Boston Harbor W15BK01-33883L Jelly Jar Porch Light Fixture, Medium, 60 W, 1 Lamp
|
|
|
Lantern with clear jelly jar design glass shade. 4-1/2" diameter x 8-1/8" height x 5-3/4" base extension. Uses one medium base bulb, 60 watt maximum, (not included). cULus Listed.
|
|
|
|
My cart:
