|
|
|
|
|
|
SuperSlide 948 Pre-Loaded Wall Bracket, 4-1/8 in L x 1-3/4 in W x 2 in D, Resin, White
|
|
|
Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system.
|
|
|
|
|
|
|
|
|
|
SuperSlide 6609 Pre-Loaded Wall Bracket, 4-1/8 in L x 1-3/4 in W x 2 in D, Resin, White
|
|
|
Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin.
|
|
|
|
|
|
|
|
|
|
Closetmaid 6610 Wall Clip, White
|
|
|
Anchors shelf to wall. Ensures stability of shelf.
|
|
|
|
|
|
|
|
|
|
SuperSlide 5655 Universal Closet Rod Support, 5-3/4 in L x 0.87 in W x 3.87 in D, Plastic, White
|
|
|
Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin.
|
|
|
|
|
|
|
|
|
|
Closetmaid 1002 Universal Joiner Plate, 1.19 in L x 2-1/4 in W x 1.13 in D, Resin, White
|
|
|
Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin.
|
|
|
|
|
|
|
|
|
|
SuperSlide 75651 Closet Rod Connector, 2 in L x 1/2 in W, Plastic, White
|
|
|
Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Keeps hangers from sliding off exposed ends. Support the connection of the two pieces of hang rod with a hang bar support. 2"H x 0.5"W x 0.5"D. Material: Plastic.
|
|
|
|
|
|
|
|
|
|
Closetmaid 6620 Wall Bracket, 2-7/8 in L x 2-1/8 in W x 1-3/4 in D, Resin, White
|
|
|
Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin.
|
|
|
|
|
|
|
|
|
|
Closetmaid 1180 Support Bracket, 12 in L x 2 in W x 2 in D, Steel, White
|
|
|
Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (1) Support Bracket, (1) Anchor, (1) NO 8 Pin
|
|
|
|
|
|
|
|
|
|
SuperSlide 6641 Wall Bracket, 2 in L x 2.19 in W x 1-3/4 in D, Resin, White
|
|
|
Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin
|
|
|
|
|
|
|
|
|
|
Closetmaid 71927 Wall Clip
|
|
|
Anchors shelf to wall. Ensures stability of shelf.
|
|
|
|
My cart:
