|
|
|
|
|
|
Plews/Edelmann 18-603 Air Blow Guns, Industrial, Milton Design
|
|
|
Adjust from low air to a full volume flow. Recommended air pressure to 150 PSI maximum. Knurled nozzle makes handling easy. Complete with handy pocket clip. Fits all Industrial/Milton Design 1/4" coupler bodies.
|
|
|
|
|
|
|
|
|
|
Plews/Edelmann 18-319 Tru-Flate Air Safety Blow Guns, Pocket Size, Lever Type
|
|
|
Vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Hang up hook and 1/4" NPT female inlet included. Meets OSHA regulation 1001 for 30 PSI "dead head'' pressure. Inlet Pressure - 150 PSI.
|
|
|
|
|
|
|
|
|
|
Stanley BTFP72330 Safety Blow Gun, 1/4 in FNPT x 1/8 in FNPT, Die-Cast Zinc, Chrome Plated
|
|
|
Safety blow gun.
|
|
|
|
|
|
|
|
|
|
Tru Flate 18-143 Clip-On Safety Blow Gun, 1/4 in FNPT, 150 psi, Epoxy Coated
|
|
|
Converts any standard ball foot tire chucks to a safety blowgun. Vented nozzle and built-in pressure reduces limit nozzle pressure to a maximum of 30 PSI, with up to 150 PSI inlet pressure. Conforms to No.1001 OSHA regulation. Epoxy finish.
|
|
|
|
|
|
|
|
|
|
Mintcraft CC970 Air Blow Gun, 1/4 in
|
|
|
Die-cast body. 1/4" air inlet.
|
|
|
|
|
|
|
|
|
|
Tru Flate 18-233 Safety Blow Gun, 1/4 in FNPT, 150 psi
|
|
|
Increased performance and yet still meets OSHA regulation 100-1 for 30 PSI 'dead head' pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body. Complete with hang-up hook and 1/4" NPT female inlet. Inlet pressure 150 PSI.
|
|
|
|
|
|
|
|
|
|
Plews/Edelmann 18-231 Tru-Flate Air Blow Guns, Button Type
|
|
|
Conforms to all Federal requirements related to OSHA, including noise level regulations. Tamper proof pressure reducers built into this gun limit nozzle pressure to 30 PSI or less when used with listed inlet pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast, epoxy finish body. Complete with hang-up hook and 1/4" female NPT inlet.
|
|
|
|
|
|
|
|
|
|
Plews/Edelmann 18-302 Tru-Flate Air Safety Blow Guns, Pocket Size
|
|
|
Meets OSHA regulation 100-1 for 30 PSI "dead head" pressure. Features vented nozzle to relieve the compressed air should the nozzle become plugged or accidentally obstructed. Heavy duty die cast body with hang-up hook, 1/4" NPT female inlet, and 4" extension.
|
|
|
|
|
|
|
|
|
|
Tru Flate 18-207 Standard Blow Gun, 1/4 in FNPT, Epoxy Coated
|
|
|
Oil resistant, soft replaceable rubber tip. Will not mar delicate surfaces. Ideal for leak proof seal against oil passages, fuel lines and carburetors when air pressure is needed for cleaning. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI.
|
|
|
|
|
|
|
|
|
|
Tru Flate 18-203 Standard Blow Gun, 1/4 in FNPT, Epoxy Coated
|
|
|
Comfortable thumb lever valve control with handy hanger in lever and hanger hook. Compact one piece nozzle. Allows full line pressure to be used. Includes 1/4" female NPT inlet. To comply with OSHA regulations standard blowguns must be used on a regulated air line with a pressure setting not to exceed 30 PSI.
|
|
|
|
My cart:
