|
|
|
|
|
|
Genesis GAMT403 Adapter, Gray, For: Rockwell Sonicrafter Hex Interface Oscillating Tool
|
|
|
Adapter for Rockwell SoniCrafter hex interface model.
|
|
|
|
|
|
|
|
|
|
Dremel MM70W Sanding Paper, 60/120/240 Grit
|
|
|
Sand paper accessory for sanding hardwood, softwood, chipboard, rusted metal, fiberglass and plastics. Requires MM11 or MM14 hook and loop pad accessory.
|
|
|
|
|
|
|
|
|
|
Bosch CH01 Chuck Adapter Kit, 1/8 in Chuck, 1/4 in Chuck Mount, Keyed
|
|
|
Bosch Chuck Adapter Kit, Chuck Capacity: 1/8 in, Chuck Mount Size: 1/4 in, Keyed/Keyless Chucks: Keyed, Steel, Includes: Chuck
|
|
|
|
|
|
|
|
|
|
Genesis GAMT701 Triangular Sandpaper Set
|
|
|
12 hook-and-loop sanding triangles including three 60G, three 80G, three 120G and three 240G. For use with most detail sanders and all brands of multi-purpose oscillating tools.
|
|
|
|
|
|
|
|
|
|
Rotozip WD1 Window and Door Bit, 1/4 in Dia, 2-1/2 in L, 1 in L Flute, 1/4 in Dia Shank, Steel
|
|
|
Constructed from high-speed steel with a cutting depth of 1 in. Used for window and door cutouts.
|
|
|
|
|
|
|
|
|
|
Rockwell RW9157 Replacement Fastening Kit, For: RK5100K Through RK5108K, RK5112K, RK2514K2 Model Oscillating Tool Kit
|
|
|
Replacement flange for the SoniCrafter tool. Includes screw, flange and Allen key.
|
|
|
|
|
|
|
|
|
|
Genesis GAMT514 Flush-Cut Blade, 15 TPI
|
|
|
Aggressive flush cuts and plunge cuts in wood, plastic, drywall and other soft materials up to 1-9/16 in deep. Beveled tooth design for maximum blade durability and versatility. Special design creates cleaner, more accurate flush cuts. For use with all brands of Multi-purpose oscillating tools.
|
|
|
|
|
|
|
|
|
|
Genesis GAMT601 Scraper Blade, 2 in, Stainless Steel
|
|
|
Rigid scraper blade for removal of vinyl flooring, bonded carpeting, old coats of varnish/paint and adhesives. Flexible scraper blade for removal of caulk, coats of peeling paint and soft adhesives. For use with all brands of multi-purpose oscillating tools.
|
|
|
|
|
|
|
|
|
|
1/4 ARBOR ROUTER BIT
|
|
|
"Slotting cutter arbors will work with any slotting cutter with a 5/16"" arbor. Use on hand held and table mounted portable routers."
|
|
|
|
|
|
|
|
|
|
Rotozip TC1 Tilecut Bit, 1/8 in Dia, 2-1/2 in L, 1 in L Flute, 1/8 in Dia Shank, Carbide
|
|
|
Constructed from carbide with a cutting depth of 1 in, used to cut ceramic tile, cement board, stucco and plaster.
|
|
|
|
My cart:
