|
|
|
|
|
Halex 12101B Set Screw Connector, 1/2 in, Zinc, 50/PK
|
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
|
|
|
|
|
|
|
Halex 12301B Set Screw Connector, 3/4 in, Zinc, 25/PK
|
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
|
|
|
|
|
|
|
Halex 02101B Connector, 1/2 in Compression, Zinc
|
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
|
|
|
|
|
|
|
Halex 02301B Connector, 3/4 in Compression, Zinc, 25/PK
|
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
|
|
|
|
|
|
|
Halex 12110 Set Screw Connector, 1 in, Zinc, 15/BX
|
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
|
|
|
|
|
|
|
Halex 03705B Offset Connector, 1/2 in, Zinc
|
|
Zinc die-cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL approved.
|
|
|
|
|
|
|
|
Halex 90371 Set Screw Connector, 1/2 in, Zinc, 20/BX
|
|
Zinc die-cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL approved.
|
|
|
|
|
|
|
|
Halex 90401 Offset Nipple, 1/2 in, Zinc
|
|
Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.
|
|
|
|
|
|
|
|
Halex 03707B Set Screw Offset Connector, 3/4 in, Zinc
|
|
Zinc die-cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL approved.
|
|
|
|
|
|
|
|
Halex 02110 Connector, 1 in Compression, Zinc
|
|
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
|
|
|