|
|
|
|
|
Carlon E989NNJ-CAR Molded Junction Box, PVC, Surface Mounting
|
|
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section 314.29.
|
|
|
|
|
|
|
|
Carlon E987RR Molded Junction Box, Polycarbonate, Surface Mounting
|
|
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section 314.29.
|
|
|
|
|
|
|
|
Raco SC060604RC Pull Box Enclosure, 1-Gang, Steel, Enamel-Coated, Surface
|
|
Made of 16 ga steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.
|
|
|
|
|
|
|
|
Raco SC080804RC Pull Box Enclosure, 1-Gang, Steel, Enamel-Coated, Surface
|
|
Made of 16 ga steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.
|
|
|
|
|
|
|
|
PLATE LEVELNG FLUSH-FIT DEVICE - Case of 10
|
|
Raco Flush-Fit Leveling Plate, Metal, Dimensions: 5.50 L x 3.38 W x 5.750 H in
|
|
|
|
|
|
|
|
Carlon E989R Molded Junction Box, Noryl, Recessed, Surface Mounting
|
|
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section 314.29.
|
|
|
|
|
|
|
|
Carlon B121BFBRR Box Kit, 4.36 in W, 2.24 in D, 3.33 in H, 1 -Gang, Non-Metallic Box, Ivory
|
|
Duplex outlet with ABS cover and dual hinge caps to keep out dust. Adjusts from 0 to 1-7/8 in, 21 cu-in capacity. UL listed 5274 and classified 2HR W/C. UL514C scrub water tested. Patented residential design.
|
|
|
|
|
|
|
|
Eaton Cooper Wiring TR5797 Floor Box Receptacle, 2 -Pole, 125 V, 15 A
|
|
Tamper-resistant single receptacle on recessed mounting strap, 18 cu-in steel back box, solid brass cover, gasket and threaded brass closure cap with watertight neoprene rubber O-ring.
|
|
|
|
|
|
|
|
Carlon E971FBDI-2 Box, 7.02 in D, 1 -Gang, Non-Metallic Box
|
|
Single hole installation. Includes everything needed to install including a hole saw, solid brass cover and single gang grounded receptacle. Low voltage telephone/cable insert plate included. Includes blank plate for custom installation. Polycarbonate construction.
|
|
|
|
|
|
|
|
Steel City E97BRR Floor Box Cover, Rectangular, Brass
|
|
Flush floor mount, for duplex or GFCI receptacle, used with Carlon floor box E971FB. Solid brass cover, plastic adapter ring, gasket and everything needed for installation is included. (Receptacle sold separately).
|
|
|