Home > PAINT & SUNDRIES > SUNDRIES > ROOF & DRIVEWAY > ROOF COATINGS
Sort By:
1 2 3 4
ROOF COATING FIBRED 3.6QT
ROOF COATING FIBRED 3.6QT
Our Price: $11.81

Protective coating that provides a waterproof barrier over the existing roof surface. May be used over composition and built-up roofs. Fiber-reinforced, liquid brush grade. Covers approximately 50 sq ft per gallon.
COATING NON FIBR/FOUND 3.6QT
COATING NON FIBR/FOUND 3.6QT
Our Price: $12.21

A thin liquid applied coating designed to seal and penetrate exterior concrete and masonry surfaces while providing a moisture barrier. It can also be used as an anti-corrosive coating for below grade steel or metal piping. Seals and protects wood footings from decay and termites. Covers approximately 70 sq. ft. per gallon.
Quikdry 104Q Asphalt Spray Primer
Quikdry 104Q Asphalt Spray Primer, 17 oz Aerosol Can, Liquefied Gas, Black, Petroleum Distillates, 550 g/L VOC
Our Price: $19.89

Used on edging and flashings, weathered composition roofing, concrete, and masonry surfaces prior to the use of solvent based asphalt coatings or adhesives. Covers 33 sq. ft. per can depending on porosity of surface.
Henry SS003 Fibered Roof Coating
Henry SS003 Fibered Roof Coating, 4.75 gal, Liquid, Black, Petroleum, 0.93 SG, 105 deg F Flash Point
Our Price: $39.50

A heavy bodied cutback asphalt coating, reinforced with synthetic fibers. The coating cures to a tough, weather resistant film. It has good adhesion to brick, concrete and steel, and because of its ability to retain its pliability, this coating resists damage which may result from expansion and contraction caused by weather, temperature variations, and normal building vibrations. Excellent material for surfacing most asphalt based or metal roofs. It is recommended for resurfacing weathered asphalt roof surfaces. Aged asphalt roof surfaces are rejuvenated as the coating penetrates the worn asphalt substrates helping to restore its original properties. NOT recommended for use with coal tar roofs. Approximately 50 sq. ft. per gallon. Coverage rate varies depending on texture and porosity of surface.
Gardner-Gibson 0105-GA Roof Coating
Gardner-Gibson 0105-GA Fibered Roof Coating, 3.6Qt, Liquid, Black, Mild Hydrocarbon, 0.98 SG, <250 g/l VOC
Our Price: $40.52

Protective coating that provides a waterproof barrier over the existing roof surface. May be used over composition and built-up roofs. Fiber-reinforced, liquid brush grade. Covers approximately 50 sq ft per gallon.
Henry Roofers Choice Fibered Roof Coating
Henry Roofers Choice Fibered Roof Coating, 4.75 gal, Liquid, Black, Petroleum, 0.93 SG, 105 deg F Flash Point
Our Price: $40.95

For gutters and flashings. Designed to penetrate and saturate flat built-up and composition roofs. Provides a tough, durable, weather-resistant film. Contains non-mineral fibers. Can be used at lower temperatures. Not formulated for use on any surface other than horizontal FLAT. In hot weather, this product may flow from sloped surfaces. Not recommended for use on wood or asphalt shingles. Covers 100 sq. ft per 1.5 gallons. Depending on texture and porosity of surface. Not for sale in California. Black.
Henry Roofers Choice Fibered Cold Process Roof Coating
Henry Roofers Choice Fibered Cold Process Roof Coating, 4.75 gal, Liquid, Black, Petroleum, 1.01 SG, 250 g/L VOC
Our Price: $40.97

Brush or squeegee grade, waterproof adhesive made from asphalt, solvents, and organic fibers. Designed for bonding layers of asphalt coated base sheets. Eliminates burn and fire hazards of hot asphalt. U.L. Class A in a variety of roof systems. Use in applications with 25# or heavier asphalt-coated fiberglass base sheets, conventional mineral surface cap sheet, polyester fabric and bonding gravel or granule surfacing. Coverage varies with smoothness and porosity of surface coated.
Henry Premier Fibered Asphalt Roof Coating
Coating Rf Fbr Asphalt Blk .9g - Case of 4
Our Price: $41.20

Use for resurfacing and rejuvenating old, worn roofs. Resaturates and extends roof life. Use on asphalt roofs, metal roofs and composition roofs. Heavy-bodied asphalt coating, reinforced with non-asbestos fibers. Cures to a tough, flexible, weather resistant film. Resists damage from minor expansion and contraction by weather, temperature, and normal building vibration. Covers 60-100 per sq. ft. per gallon depending on surface type. Not for sale in California.
Henry Premier Fibered Asphalt Roof Coating
Henry Premier Fibered Asphalt Roof Coating, 4.75 gal, Liquid, Black, Petroleum, 0.93 SG, 105 deg F Flash Point
Our Price: $42.75

Use for resurfacing and rejuvenating old, worn roofs. Resaturates and extends roof life. Use on asphalt roofs, metal roofs and composition roofs. Heavy-bodied asphalt coating, reinforced with non-asbestos fibers. Cures to a tough, flexible, weather resistant film. Resists damage from minor expansion and contraction by weather, temperature, and normal building vibration. Covers 60-100 per sq. ft. per gallon depending on surface type. Not for sale in California.
Henry 107 Non-Fibered Asphalt Emulsion Sealer
Henry 107 Non-Fibered Asphalt Emulsion Sealer, 4.75 gal, Liquid, Black, Slight, > 212 deg F Flash Point, 6 - 9 pH
Our Price: $43.01

Use as a protective roof coating for new or existing composition roofs with smooth surfaces, as a base coat for reflective coatings, waterproofing adhesive for polyester systems, and as an anti-corrosive protection for metal roofs, steel structures, pipes, and tanks above or below ground level. Solvent free, asphalt emulsified with Bentonite clay and water. Applied cold, non-flammable while wet, corrosion-resistant, and waterproof when dry. Does not crack, run, or sag under extreme weather conditions. Complies with ASTM D-1227-95 Type III, Class I. U.L Classified. FM approved. Covers approximately 100 sq ft per 3-4 gallons when applied as one coat.
   
 
1 2 3 4